Products

Stainless steel elbow with a 1/2" FPT inlet and 1/2" FPT outlet.

1/2" mpt X 3/8" Barb Elbow

Called a close nipple because there is no space between the threads. For connecting a 1/2'' ball valve to a union.

A stainless steel nipple used to combine two fittings with 1/2" FPT threads.  There is a 1/2'' space between threads.

A stainless steel nipple used to combine two fittings with 1/2" FPT threads.  2" in length.

1/2" SS Plug.  1/2" mpt.

1/2" Female thread on one side and 1/2" male thread on the other. Called a street elbow because of the female threads on one side and the male thre...

304 Stainless, 1/2" Female Pipe Thread on all three openings. 2" length x 1.5" width

Straight splicer.

Tee splicer.

Specially designed to clean carboys and bottles. Stainless steel construction. Easily attaches to almost any faucet (adapter may be required).

Stainless steel screw clamp for beer lines from 3/16 to 1/2" or 3/8 to 7/8".  Please make your selection above.

Stainless steel washer that fits over 1/2" SS nipples.  The whole is 7/8"

Used to install or remove ear clamps.

In times past, fresh star anise was chewed after each meal to aid digestion and to sweeten the breath.  Used in specialty Belgian and holiday style...

Still Spirits Turbo yeast is combination of distilling yeast and the nutrients the yeast need for a fast and effective fermentaion that will produc...

Fits 3, 5, & 6 gal PET Carboys.  Choose drilled or solid Top Diameter: 2.375" Bottom Diameter: 1.656"   California Proposition 65 ⚠ Proposition...

Fits 3, 5, 6, 6.5 gal  Glass Carboys.  Choose drilled or solid

Stainless Steel, 10 1/4" Diameter.  From PolarWare.

 fine mesh nylon bag with a flat bottom, 18 ¾″ × 19″. Hole size is about 1/64" or 397 microns.

BREW IN A BAG NYLON STRAINING BAG 26" X 26"

A loose cheese cloth bag that is perfect for adding hops to boiling wort.

Straining bag (NYLON) 18" x 32" Coarse Mesh

Straining Bag 12″ × 19″ fine mesh.  Perfect for steeping grains or lots of hops.

Straining bag (NYLON) 10" x 23" Fine Mesh

A drawstring-top nylon hop bag of fine mesh, 8″ x 9 ¼″.

This fine nylon mesh bag is 8 1/2" x 9 1/2" and ideal for mashing specialty grain for intermediate brewing or even dry hopping during a secondary f...

Natural Strawberry Flavoring (with other natural flavors) provides excellent fruit flavor without sweetness. Fruit flavoring is an excellent way to...

Fresh strawberries coupled with juicy pear. This cider is sweet and fruity, especially good when served chilled on a hot summer's eve. ABV Approx: ...

Strong, warm aroma. For finishing English style ales Suggested for bittering Vienna and Belgian ales. Average Alpha 3.0

Summer Wheat 1 gallon kit.  

Hop Type: Bittering Origin: United States Alpha Acid: 18.5% Similar Varieties: Simcoe, Columbus, Warrior, Millenium Common Styles: IPAs,...

The Super Agata bench capper has a spring-mounted adjustable capping mechanism, making it instantly compatible with bottles of different sizes.    

Super-Kleer K.C. is a 2-stage fining kit sized to dose 5-6 gallons of beer or wine. Each 65 ml kit includes separate packets of liquid Kieselsol an...

Established in 1935 and located in Oregon's Willamette Valley, this fruit is some of the most delicious in the world. The purees contain no seeds, ...

While a cousin to the Florida orange, this sweet variety will not give your beer a metallic taste like the domestic version.  If you're familiar wi...

19.5mm corks, fits 750ml wine bottles and 750ml Tennessee liquor bottles.

Tail pieces are attached to the keg coupler or shank via a hex nut and are sealed with a vinyl washer.  The 3/16" tail piece is used with the 3/16"...

Tail pieces are attached to the keg coupler or shank via a hex nut and are sealed with a vinyl washer.  The 3/16" tail piece is used with the 3/16"...

Tail pieces are attached to the keg coupler or shank via a hex nut and are sealed with a vinyl washer.  The 3/16" tail piece is used with the 3/16"...

Tail pieces are attached to the keg coupler or shank via a hex nut and are sealed with a vinyl washer.  The 3/8" tail piece is most commonly used o...

Tail pieces are attached to the keg coupler or shank via a hex nut and are sealed with a vinyl washer.  The 5/16" tail piece is used most commonly ...

This tail piece has a 1/4" flare fitting.  Works great when switching back and forth from ball lock to commercial keg couplers.

Just in time for sun and sand fun, add sweet and tangy citrus flavors and make your summertime beer even more refreshing.

Grape tannins.

Carbon dioxide dual gauge regulator with easy adjust knob and 5/16" barbed check valve.  This knob pulls out so you can easily adjust the pressure ...

Ensure fresh-tasting beer from your kegerator with this kegerator cleaning kit. The check ball lifter is inserted into the bottom of the coupler pr...