Hardware

This is the Stainless Steal Bulkhead that we use on our series of weldless fittings.  1/2" FPT x 1/2" MPT along with a flat, thick rubber washer th...

3/8" Barb x 3/4" female garden hose.

304 Stainless, 1/2" Female Pipe Thread on all three openings. 2" length x 1.5" width

A beer shank is installed through a wall or a refrigerator door and connects to the faucet and the beer tubing.  This beer shank has a 3/16 inch in...

Plug a shank while not in use.

A faucet spout plug is for the end of a faucet to keep the faucet clean and dry when not in use.  This is the economical way of controlling flies a...

The NUKATAP beer faucet features a forward sealing design. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealin...

Tail pieces are attached to the keg coupler or shank via a hex nut and are sealed with a vinyl washer.  The 3/8" tail piece is most commonly used o...

Used to install or remove ear clamps.

This air valve has a 5/16" Barbed outlet with a check valve back flow preventer.  The fitting is 1/4" male pipe thread.

CO2 Stem is the inlet that attaches to the CO2 tank.  The thread is left hand thread as is most common with high pressure valves.

This bulkhead allows you to keep your CO2 outside of the refrigerator or freezer and run your gas line through the wall without drill a large whole...

Lid replacement for ball lock kegs.

Dip tube orings for home brew kegs.

This is an S coupler and is often referred to as the "Euro" coupler.

12" wide by 6" deep stainless steel drip tray.  Attach with screws and easily remove for cleaning.  This drip tray can accomodate 1 to 5 beer faucets.

Quickly connect or disconnect your CO2 tank and regulator from your kegerator and have your CO2 ready for an excursion.  You can also use these to ...

Add an additional 24" to the height of your Blichmann Hellfire Burner with these leg extensions. This is an ideal upgrade for anyone who wants to u...

The KOMOS is a handy and inexpensive tool that every homebrew kegger should have in their toolbox.  It's really useful for the most common fittings...

The most common relief valve. Fits most Cornelius and Firestone style kegs. Long body with spring with gray top and pull ring. Max. pressure rating...

Tail pieces are attached to the keg coupler or shank via a hex nut and are sealed with a vinyl washer.  The 1/4" tail piece is used most commonly o...

50' of 3/8" copper tubing. Used for making chillers.

Made from 304 stainless steel. When used with the female QD these quick disconnects seal up very well in either flow direction, without a lot of wo...

Add a thermometer or valve to any kettle or cooler using this stainless steel bulkhead.  All parts are 304 SS. 

3/4" female garden hose thread to 1/2" female pipe thread.

Called a close nipple because there is no space between the threads. For connecting a 1/2'' ball valve to a union.

Stainless steel elbow with a 1/2" FPT inlet and 1/2" FPT outlet.

Use this fitting for connecting tubing directly to your pump. 1/2" FPT on one side, with a 1/2" barb on the other.

These will work with faucets that are mounted through a refrigerator door or wall. They look great and they are small enough to not hit the wall an...

Description The ultimate portable draft faucet! Compact & lightweight with all the advantages of a standard NukaTap forward sealing faucet I...

This tail piece has a 1/4" flare fitting.  Works great when switching back and forth from ball lock to commercial keg couplers.

Ear clamps are the best choice for clamping beer or gas line and eliminate any possible leaks.  There are several sizes to choose from: #140 - for...

Tail pieces are attached to the keg coupler or shank via a hex nut and are sealed with a vinyl washer.  The 3/16" tail piece is used with the 3/16"...

Tail pieces are attached to the keg coupler or shank via a hex nut and are sealed with a vinyl washer.  The 3/16" tail piece is used with the 3/16"...

This item adapts any beer faucet to a 1/4" flare fitting so that it can attach to a flare quick disconnect.  

This two-gauge Deluxe Nitrogen Regulator is the best available on the market. Our high quality regulator provides a reading of keg dispensing press...

Poppet valve that fits the most common style of ball lock and pin lock kegs.

This false bottom fits the 8 gallon tri-clad kettle to its specific 14" diameter and stands up off the bottom above the ball valve but below the th...

12" wide surface mount drip tray.  Separates for cleaning.

This XL bulkhead has a two inch long all tread nipple. Unlike the smaller bulkheads that may not provide enough thread when connected, this XL bulk...

The most common relief valve. Fits most Cornelius and Firestone style kegs. Long body with spring with  pull ring. Max. pressure rating: 100 psi

Short dip tube for gas-in side of Cornelious kegs

3.5" Shank Pass Through Cooler Coupling Designed forJockey Boxes and our Jumper Boxes™, this 3.5" pass through shank is made from stainless steel a...

This really handy ball lock disconnect has an integrated tap shank so you can attach standard beer taps such as the Nukatap Flow Control faucet dir...

Replacement liquid tube for 5 gallon kegs For use with Kegco, Cornelius, and AEB kegs Compatible with Spartan and Super Challenger tanks Comes com...

The classy way to say "Don't you dare drink my beer!" Do you have a draft system and live with either teenage kids or thirsty roomates? This can po...

This is a copper"Shell in Tube" or "Counter Flow" heat exchanger.  The inside tubing is made from 12' of 5/8" convoluted (twisted) stainless steel ...

This CO² Leak Stopper screws into a standard CO² cylinder valve, between the regulator and valve, and creates a tight, secrure seal from any leakin...