Hardware

1/2" mpt X 3/8" Barb Elbow  used in false bottoms 

Tilts carboy allowing easier siphoning.

This is the small oxygen regulator that fits the disposable oxygen bottles. No gauges, just a knob on top that adjusts pressure. The output is a 1/...

A beer shank is installed through a wall or a refrigerator door and connects to the faucet and the beer tubing.  This beer shank has a 3/16 inch in...

Replaces the lever in a standard or self closing faucet.   California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Plug a shank while not in use.

Replaces the washer in the back of a faucet that seals against the beer shank.

This is a round faucet knob.

Replaces the lever washer in a perlick faucet.

Replaces the washer the lever sits against in the faucet when the faucet is closed.

Description The ultimate portable draft faucet! Compact & lightweight with all the advantages of a standard NukaTap forward sealing faucet I...

Serve your beer out of cornelius (corny/soda) keg using this complete ball lock beer faucet and stop trying to manage a leaky, plastic faucet that ...

Used to attach a tail piece to a keg coupler or shank.

Tail pieces are attached to the keg coupler or shank via a hex nut and are sealed with a vinyl washer.  The 3/16" tail piece is used with the 3/16"...

Quickly switch from from a commercial keg to a home brew ball lock keg.  Simply attache a pair of ball lock disconnects to your existing beer lines...

Add a thermometer quickly and easily to your kettle or keg.  This thermometer has a 6" probe and features a hermetically sealed face, all stainless...

This air valve has a 1/4" Barbed outlet with a check valve back flow preventer.  The fitting is 1/4" male pipe thread.

Manifolds allow you to have one CO2 tank with multiple lines. Each line can be turned off individually without affecting flow to other kegs. Each b...

1/4" left hand threaded nipple.   Used to join to regulators to create a two product two pressure set up. 

1/4" Right hand threaded nipple.   Used to join to secondary regulators with right hand threaded ports or for joining gas manifolds together.

Poppet valve that fits the most common style of ball lock and pin lock kegs.

This false bottom fits the 15 gallon tri-clad kettle to its specific diameter and stands up off the bottom above the ball valve but below the therm...

This false bottom fits the 8 gallon tri-clad kettle to its specific 14" diameter and stands up off the bottom above the ball valve but below the th...

This is a pick up tube for your kettle.  The 1/2 in. mpt end screws into the back of a bulkhead in a kettle and the tube is attached to the end of ...

This keg pump comes with a d style coupler.  This is the most common style used in America. Pump is approximately 4" tall.  Also comes with picnic ...

This weldless sight glass is 11 or 16" long and works great on stock pots.  Simply drill a 7/8" hole in your kettle and screw on the weldless bulk ...

Use this 2 inch threaded nipple to add a valve to a kettle or mash tun or to add bulkhead to anything you like. With the 2 inch threaded nipple you...

Mini CO 2 Regulator w/ 1/4" MFL   Features a 1/4" MFL This mini regulator uses a 74 Gram Co 2 Cartridge 5/8" thread.   You can also add a gas disco...

74 gram CO2 cartridge for portable mini CO2 regulator. One cartridge is enough CO2 to dispense up to two 5 gallon Cornelius kegs.

Outfit any 3" diameter draft tower with these stainless steel Intertap Tower Shanks with Duotight compatible tailpiece. The 1/4" barb 

The Anvil High Performance Burner is efficient, powerful, fast, and quiet. The burner comes with modular legs, allowing you to choose your desired ...